L3+ dead after restart

Discuss issues with mining rigs and connectivity issues with experienced Prohashing miners.
Forum rules
Welcome to the mining rig and connectivity support forum!

This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.

Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum's purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Locked
josedecuba
Posts: 4
Joined: Sat Apr 17, 2021 6:57 pm

L3+ dead after restart

Post by josedecuba » Sat Apr 17, 2021 7:02 pm

my l3+ was working fine and now after a restart refuse to connect back again. no change was made on the config . just showing dead but the machine connect to my second pool whitout any problem. the second pool is another pool
Top
chrisroman1
Posts: 4
Joined: Mon Jun 03, 2019 10:00 am

Re: L3+ dead after restart

Post by chrisroman1 » Sat Apr 17, 2021 10:19 pm

Ummmm just press the reset button on the device. It happens to me all the time.
Top
josedecuba
Posts: 4
Joined: Sat Apr 17, 2021 6:57 pm

Re: L3+ dead after restart

Post by josedecuba » Sun Apr 18, 2021 10:22 am

chrisroman1 wrote: ↑Sat Apr 17, 2021 10:19 pm Ummmm just press the reset button on the device. It happens to me all the time.
thanks for the suggestion but it dindt
not for me, i did a reboot, load again the firmware, and a lot of reboot, and nothing resolve my problem, iam just mining to another pool, i dind try anymore today. maybe later i'll try again. i no it does not have any sense.
Top
User avatar
ToeKnee
Posts: 38
Joined: Fri Apr 16, 2021 10:07 am

Re: L3+ dead after restart

Post by ToeKnee » Tue Apr 20, 2021 7:50 pm

I have an L3+ and this is what I use through HiveOS Asic for L3+. I know that HiveOS's firmware for the L3+ runs a little different than other brands of firmware, e.g., look at the variable inside the password ... it reflects the worker's name.

Pool: stratum+tcp://prohashing.com:3333
Wallet: [YOUR PROHASHING USER NAME]
Pw: n=%WORKER_NAME%,o=L3
Top
Locked

Return to “Mining rig and connectivity support”