I have an antminerl3+ Suddenly mining efficiency falls to zero. Miner status screen shows normal. I am seeing the following in my kernel log.
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][18]@ChainID:[0], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][16]@ChainID:[1], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][18]@ChainID:[2], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][17]@ChainID:[3], Chip[C]
Mining efficiency zero
Forum rules
Welcome to the mining rig and connectivity support forum!
This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.
Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum's purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Welcome to the mining rig and connectivity support forum!
This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.
Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum's purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Re: Mining efficiency zero
Have you flashed the firmware before? I'm trying to read up on this and all i can find is that people flashed their L3+ incorrectly, for instance, once guy accidenly flashed his L3+ with D3 firmwarekenthead wrote:I have an antminerl3+ Suddenly mining efficiency falls to zero. Miner status screen shows normal. I am seeing the following in my kernel log.
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][18]@ChainID:[0], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][16]@ChainID:[1], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][18]@ChainID:[2], Chip[C]
Dec 19 16:57:09 (none) local0.notice cgminer[382]: Dump IIC Data:[1][98][0][17]@ChainID:[3], Chip[C]
Do any of the hashboards show up (or are any missing) when you access your miner?
Should show 4, just like above.
-
AppleMiner
- Posts: 736
- Joined: Sat Sep 30, 2017 1:44 pm
Re: Mining efficiency zero
Mining efficeincy takes 2 hours to get a good reading.
I think they rebooted the server.
Until its hit a 2 hour mark that reading will likely be off for a while.
FYI...it is normal for you to have 0 mining efficiency when the pool isn't up for you to connect to and mine on.
I think they rebooted the server.
Until its hit a 2 hour mark that reading will likely be off for a while.
FYI...it is normal for you to have 0 mining efficiency when the pool isn't up for you to connect to and mine on.