Mining, But No Shares, Have I Setup Correctly?

Encounter a problem related to the pool or have a request for a feature? Post your issue here and we will help you out.
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.

Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.

We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Locked
Elixith
Posts: 2
Joined: Tue Sep 26, 2017 2:20 pm

Mining, But No Shares, Have I Setup Correctly?

Post by Elixith » Tue Sep 26, 2017 2:24 pm

Hi,

I'm new to mining and I just wanted to check if I have set everything up correctly, as I appear to be mining, detecting new blocks, but not accepting any shares, any help and support would be much appreciated, see my log below:

This is version 2014-02-28 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013,2014 Christian Buchner
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2017-09-26 18:52:02] 2 miner threads started, using 'scrypt' algorithm.
[2017-09-26 18:52:02] Starting Stratum on stratum+tcp://prohashing.com:3333
[2017-09-26 18:52:06] Stratum detected new block
[2017-09-26 18:52:06] Stratum detected new block
[2017-09-26 18:52:06] GPU #0: GeForce GTX 1050 Ti with compute capability 6.1
[2017-09-26 18:52:06] GPU #0: the 'T' kernel ignores the texture cache argument
[2017-09-26 18:52:06] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 1
[2017-09-26 18:52:06] GPU #0: 32 hashes / 4.0 MB per warp.
[2017-09-26 18:52:06] GPU #1: GeForce GTX 750 Ti with compute capability 5.0
[2017-09-26 18:52:06] GPU #1: the 'T' kernel ignores the texture cache argument
[2017-09-26 18:52:06] GPU #1: interactive: 1, tex-cache: 0 , single-alloc: 1
[2017-09-26 18:52:06] GPU #1: 32 hashes / 4.0 MB per warp.
[2017-09-26 18:52:07] GPU #0: Performing auto-tuning (Patience...)
[2017-09-26 18:52:07] GPU #0: maximum total warps (BxW): 747
[2017-09-26 18:52:09] GPU #1: Performing auto-tuning (Patience...)
[2017-09-26 18:52:09] GPU #1: maximum total warps (BxW): 752
[2017-09-26 18:52:10] Stratum detected new block
[2017-09-26 18:52:29] Stratum detected new block
[2017-09-26 18:52:57] Stratum detected new block
[2017-09-26 18:53:15] GPU #1: 273558.83 hash/s with configuration T10x20
[2017-09-26 18:53:15] GPU #1: using launch configuration T10x20
[2017-09-26 18:53:15] GPU #1: GeForce GTX 750 Ti, 172.51 khash/s
[2017-09-26 18:53:32] Stratum detected new block
[2017-09-26 18:53:32] GPU #1: GeForce GTX 750 Ti, 263.48 khash/s
[2017-09-26 18:53:51] Stratum detected new block
[2017-09-26 18:53:51] GPU #1: GeForce GTX 750 Ti, 263.47 khash/s
[2017-09-26 18:53:52] GPU #0: 375152.65 hash/s with configuration T24x12
[2017-09-26 18:53:52] GPU #0: using launch configuration T24x12
[2017-09-26 18:53:52] GPU #0: GeForce GTX 1050 Ti, 229.79 khash/s
[2017-09-26 18:54:31] GPU #0: GeForce GTX 1050 Ti, 358.64 khash/s
[2017-09-26 18:54:42] Stratum detected new block

I just continue to see notifications of the hash rate and new blocks detected.

Here is my bat file cmd:

cudaminer.exe -o stratum+tcp://prohashing.com:3333 -u Elixith -p n=elixith1 -i 1 -l auto -C 1 -m 1 -H 2

Any ideas?
Top
micca410evo
Posts: 120
Joined: Wed Jul 26, 2017 11:55 am

Re: Mining, But No Shares, Have I Setup Correctly?

Post by micca410evo » Tue Sep 26, 2017 5:35 pm

try another pool which accepts low difficulty, my knowledge is PH isn't accepting difficulty under 4096 or even 8192.
Top
Elixith
Posts: 2
Joined: Tue Sep 26, 2017 2:20 pm

Re: Mining, But No Shares, Have I Setup Correctly?

Post by Elixith » Tue Sep 26, 2017 5:39 pm

Thank you, I will give that a go, any recommendations for low difficulty pools?
Top
micca410evo
Posts: 120
Joined: Wed Jul 26, 2017 11:55 am

Re: Mining, But No Shares, Have I Setup Correctly?

Post by micca410evo » Tue Sep 26, 2017 5:43 pm

Elixith wrote:Thank you, I will give that a go, any recommendations for low difficulty pools?
What do you want to mine with those GPU's? for good GPU mining profitability i would say Nicehash
Top
User avatar
Steve Sokolowski
Posts: 4585
Joined: Wed Aug 27, 2014 3:27 pm
Location: State College, PA

Re: Mining, But No Shares, Have I Setup Correctly?

Post by Steve Sokolowski » Tue Sep 26, 2017 5:49 pm

Elixith wrote:Hi,

I'm new to mining and I just wanted to check if I have set everything up correctly, as I appear to be mining, detecting new blocks, but not accepting any shares, any help and support would be much appreciated, see my log below:

This is version 2014-02-28 (beta)
based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
Cuda additions Copyright 2013,2014 Christian Buchner
LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2017-09-26 18:52:02] 2 miner threads started, using 'scrypt' algorithm.
[2017-09-26 18:52:02] Starting Stratum on stratum+tcp://prohashing.com:3333
[2017-09-26 18:52:06] Stratum detected new block
[2017-09-26 18:52:06] Stratum detected new block
[2017-09-26 18:52:06] GPU #0: GeForce GTX 1050 Ti with compute capability 6.1
[2017-09-26 18:52:06] GPU #0: the 'T' kernel ignores the texture cache argument
[2017-09-26 18:52:06] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 1
[2017-09-26 18:52:06] GPU #0: 32 hashes / 4.0 MB per warp.
[2017-09-26 18:52:06] GPU #1: GeForce GTX 750 Ti with compute capability 5.0
[2017-09-26 18:52:06] GPU #1: the 'T' kernel ignores the texture cache argument
[2017-09-26 18:52:06] GPU #1: interactive: 1, tex-cache: 0 , single-alloc: 1
[2017-09-26 18:52:06] GPU #1: 32 hashes / 4.0 MB per warp.
[2017-09-26 18:52:07] GPU #0: Performing auto-tuning (Patience...)
[2017-09-26 18:52:07] GPU #0: maximum total warps (BxW): 747
[2017-09-26 18:52:09] GPU #1: Performing auto-tuning (Patience...)
[2017-09-26 18:52:09] GPU #1: maximum total warps (BxW): 752
[2017-09-26 18:52:10] Stratum detected new block
[2017-09-26 18:52:29] Stratum detected new block
[2017-09-26 18:52:57] Stratum detected new block
[2017-09-26 18:53:15] GPU #1: 273558.83 hash/s with configuration T10x20
[2017-09-26 18:53:15] GPU #1: using launch configuration T10x20
[2017-09-26 18:53:15] GPU #1: GeForce GTX 750 Ti, 172.51 khash/s
[2017-09-26 18:53:32] Stratum detected new block
[2017-09-26 18:53:32] GPU #1: GeForce GTX 750 Ti, 263.48 khash/s
[2017-09-26 18:53:51] Stratum detected new block
[2017-09-26 18:53:51] GPU #1: GeForce GTX 750 Ti, 263.47 khash/s
[2017-09-26 18:53:52] GPU #0: 375152.65 hash/s with configuration T24x12
[2017-09-26 18:53:52] GPU #0: using launch configuration T24x12
[2017-09-26 18:53:52] GPU #0: GeForce GTX 1050 Ti, 229.79 khash/s
[2017-09-26 18:54:31] GPU #0: GeForce GTX 1050 Ti, 358.64 khash/s
[2017-09-26 18:54:42] Stratum detected new block

I just continue to see notifications of the hash rate and new blocks detected.

Here is my bat file cmd:

cudaminer.exe -o stratum+tcp://prohashing.com:3333 -u Elixith -p n=elixith1 -i 1 -l auto -C 1 -m 1 -H 2

Any ideas?
These miners are mining normally and are working great. However, GPUs are so unprofitable that it's unlikely you'll find a share more than once an hour.

You can still use GPUs to mine here, but you'll lose a lot of money. Instead, I recommend that you select an Ethereum mining pool, where you'll be able to earn more.
Top
Locked

Return to “System support”