New to mining.....be kind
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.
Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.
We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.
Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.
We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Re: New to mining.....be kind
I forget where I got it from, but it could be the x86 build
interesting that x64 wouldn't be faster
interesting that x64 wouldn't be faster
Re: New to mining.....be kind
OK Mr. Harding.
I received 2 FutureBit Moonlanders today! (YAY, I'm a tiny miner!)
Using bfgminer 5.4.0-13-gffef5b
I got them working on my eobot pool
bfgminer.exe --scrypt -o stratum+tcp://scrypt.eobot.com:4444 --userpass eobot.701708:x,d=16 -S MLD:all --set MLD:clock=112
But when I set them to prohashing, right at the top of bfgminer, (all pools are dead).
and then a constant
Coinbase check: multiple inputs in coinbase: 0x53 or 0xde or 0x5a
Pool 0 misbehaving (coinbase check), disabling!
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333 -u mrgoldy -p,d=16 -S MLD:all --set MLD:clock=112
not sure what I should set my difficulty to yet, 16 was the example in the binary download so I left it at that
Am I missing the "scrypt" in my password argument? because I thought that if you don't specify, the default is scrypt
I received 2 FutureBit Moonlanders today! (YAY, I'm a tiny miner!)
Using bfgminer 5.4.0-13-gffef5b
I got them working on my eobot pool
bfgminer.exe --scrypt -o stratum+tcp://scrypt.eobot.com:4444 --userpass eobot.701708:x,d=16 -S MLD:all --set MLD:clock=112
But when I set them to prohashing, right at the top of bfgminer, (all pools are dead).
and then a constant
Coinbase check: multiple inputs in coinbase: 0x53 or 0xde or 0x5a
Pool 0 misbehaving (coinbase check), disabling!
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333 -u mrgoldy -p,d=16 -S MLD:all --set MLD:clock=112
not sure what I should set my difficulty to yet, 16 was the example in the binary download so I left it at that
Am I missing the "scrypt" in my password argument? because I thought that if you don't specify, the default is scrypt
-
- Posts: 646
- Joined: Sun Apr 16, 2017 3:01 pm
Re: New to mining.....be kind
im not good with bfgminer but try this
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333 -u mrgoldy -p "n=bfgminer a=scrypt" -S MLD:all --set MLD:clock=112
do you have a link to where to buy those miners
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333 -u mrgoldy -p "n=bfgminer a=scrypt" -S MLD:all --set MLD:clock=112
do you have a link to where to buy those miners
Re: New to mining.....be kind
http://www.ebay.com/itm/201944578956?_t ... EBIDX%3AIT
and after I edited with your suggestion, I still get the
Pool 0 misbehaving (coinbase check), disabling!
It does try to refresh when Pool 0 is issuing work for an old block, but then goes back to (all pools are dead)
and after I edited with your suggestion, I still get the
Pool 0 misbehaving (coinbase check), disabling!
It does try to refresh when Pool 0 is issuing work for an old block, but then goes back to (all pools are dead)
-
- Posts: 646
- Joined: Sun Apr 16, 2017 3:01 pm
Re: New to mining.....be kind
have you tried cgminer? cgminer supports asics just not sure about these, or bfgminer
Re: New to mining.....be kind
Just found this regarding coinbase check
append #skipcbcheck to pool URIs to disable it. http://savannah.nongnu.org/forum/forum. ... um_id=8088
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p "n=bfgminer a=scrypt" -S MLD:all --set MLD:clock=112
a few more references
https://bitcointalk.org/index.php?topic ... msg8769054
https://bitcointalk.org/index.php?topic ... sg15346341
fixed the all pools are dead, but still no accepted shares
append #skipcbcheck to pool URIs to disable it. http://savannah.nongnu.org/forum/forum. ... um_id=8088
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p "n=bfgminer a=scrypt" -S MLD:all --set MLD:clock=112
a few more references
https://bitcointalk.org/index.php?topic ... msg8769054
https://bitcointalk.org/index.php?topic ... sg15346341
fixed the all pools are dead, but still no accepted shares
Re: New to mining.....be kind
supposedly this bfgminer 5.4.0-13-gff6ef5b was compile specific for this asicGregoryGHarding wrote:have you tried cgminer? cgminer supports asics just not sure about these, or bfgminer
and it is working on the eobot pool
I will try cgminer tomorrow, I need to get some sleep now
Re: New to mining.....be kind
cgminer doesn't work, kept getting opencl errors. from what I saw in the readmes, it's a gpu miner
at first starting bfgminer, I am getting a bunch of issuing work for an old block. but I read here from Steve that: The purpose of this is to test your miner so that it can be assigned the coins that are most profitable for it.
viewtopic.php?t=379
but after that, I don't get any accepted, just a bunch of new block/difficulty change to
[2017-06-09 11:20:43] Stratum from pool 0 detected new block
[2017-06-09 11:20:43] Pool 0 is issuing work for an old block: 89bf4d94d8b6e43
f84af1e31f140024fdb58948f7de42be81cc7028694a6f5a
[2017-06-09 11:21:14] Pool 0 caught up to new block
[2017-06-09 11:21:14] Network difficulty changed to 456 ( 3.27G)
[2017-06-09 11:21:14] Stratum from pool 0 detected new block
[2017-06-09 11:22:36] Network difficulty changed to 14.8k (105.9G)
[2017-06-09 11:22:36] Stratum from pool 0 detected new block
[2017-06-09 11:23:10] Network difficulty changed to 14.4k (102.9G)
[2017-06-09 11:23:10] Stratum from pool 0 detected new block
[2017-06-09 11:23:10] Network difficulty changed to 456 ( 3.27G)
[2017-06-09 11:23:10] Stratum from pool 0 detected new block
[2017-06-09 11:25:11] Network difficulty changed to 15.2k (109.1G)
[2017-06-09 11:25:11] Stratum from pool 0 detected new block
[2017-06-09 11:25:16] Network difficulty changed to 146k ( 1.04T)
[2017-06-09 11:25:16] Stratum from pool 0 detected new block
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p ,d=64 -S MLD:all --set MLD:clock=112
and just an FYI, I went over to multipool, setup a worker, and it works fine over there.
but I'd rather stay at prohashing, as I like the format
at first starting bfgminer, I am getting a bunch of issuing work for an old block. but I read here from Steve that: The purpose of this is to test your miner so that it can be assigned the coins that are most profitable for it.
viewtopic.php?t=379
but after that, I don't get any accepted, just a bunch of new block/difficulty change to
[2017-06-09 11:20:43] Stratum from pool 0 detected new block
[2017-06-09 11:20:43] Pool 0 is issuing work for an old block: 89bf4d94d8b6e43
f84af1e31f140024fdb58948f7de42be81cc7028694a6f5a
[2017-06-09 11:21:14] Pool 0 caught up to new block
[2017-06-09 11:21:14] Network difficulty changed to 456 ( 3.27G)
[2017-06-09 11:21:14] Stratum from pool 0 detected new block
[2017-06-09 11:22:36] Network difficulty changed to 14.8k (105.9G)
[2017-06-09 11:22:36] Stratum from pool 0 detected new block
[2017-06-09 11:23:10] Network difficulty changed to 14.4k (102.9G)
[2017-06-09 11:23:10] Stratum from pool 0 detected new block
[2017-06-09 11:23:10] Network difficulty changed to 456 ( 3.27G)
[2017-06-09 11:23:10] Stratum from pool 0 detected new block
[2017-06-09 11:25:11] Network difficulty changed to 15.2k (109.1G)
[2017-06-09 11:25:11] Stratum from pool 0 detected new block
[2017-06-09 11:25:16] Network difficulty changed to 146k ( 1.04T)
[2017-06-09 11:25:16] Stratum from pool 0 detected new block
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p ,d=64 -S MLD:all --set MLD:clock=112
and just an FYI, I went over to multipool, setup a worker, and it works fine over there.
but I'd rather stay at prohashing, as I like the format
Re: New to mining.....be kind
AHHHHH!
Just got 1 accepted! 9mins in
but it's been 15mins and still nothing else
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p "d=64 a=scrypt" -S MLD:all --set MLD:clock=112
Just got 1 accepted! 9mins in
but it's been 15mins and still nothing else
bfgminer.exe --scrypt -o stratum+tcp://prohashing.com:3333/#xnsub#skipcbcheck -u mrgoldy -p "d=64 a=scrypt" -S MLD:all --set MLD:clock=112
-
- Posts: 646
- Joined: Sun Apr 16, 2017 3:01 pm
Re: New to mining.....be kind
get it running after?