D3 and DR100 can not connect to the ore pool after the reboot is low

Discuss issues with mining rigs and connectivity issues with experienced Prohashing miners.
Forum rules
Welcome to the mining rig and connectivity support forum!

This forum is for discussing issues with mining rigs and connectivity issues with experienced PROHASHING miners. This is a great place to ask questions about connecting specific hardware to PROHASHING.

Remember, PROHASHING employees do not closely monitor the forums like we do the official support channels, so this forum's purpose is to connect you with other PROHASHING miners who have experience with similar hardware/issues. If you have connectivity issues you are unable to resolve here on the forum, please submit a ticket through the official support channels.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Locked
18973001118
Posts: 3
Joined: Thu May 10, 2018 8:36 am

D3 and DR100 can not connect to the ore pool after the reboot is low

Post by 18973001118 » Thu May 10, 2018 9:14 am

Hello, D3 and DR100 can not connect the ore pool after restart after power failure.
Top
User avatar
CSZiggy
Posts: 662
Joined: Wed Jan 31, 2018 2:44 pm

Re: D3 and DR100 can not connect to the ore pool after the reboot is low

Post by CSZiggy » Thu May 10, 2018 11:52 am

Use the network diagnostics of the D3 User Interface.
See if you can ping the pool from the miner.


Have you shut down all the equipment on the network? routers, modems, unplugged them and waited 5 mins then booted them all back up?
Top
Locked

Return to “Mining rig and connectivity support”