L3 HW

Encounter a problem related to the pool or have a request for a feature? Post your issue here and we will help you out.
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.

Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.

We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Locked
critter
Posts: 11
Joined: Sun Oct 08, 2017 9:22 pm

Re: L3 HW

Post by critter » Mon Oct 09, 2017 3:12 pm

I have 4 L3 machines and they all get hardware errors some more then others.. I have one machine that gets very few and one that gets a lot. Go figure..
Top
ZiGen
Posts: 64
Joined: Wed Oct 04, 2017 7:29 pm

Re: L3 HW

Post by ZiGen » Mon Oct 09, 2017 3:38 pm

Hi Theo,

In the last ROW - where it says "HW", in the middle is Column "Nonce#" => very bottom number (HW row) is your HW error PERCENTAGE. Capisco ? ... ;)
Top
TheoD914
Posts: 28
Joined: Wed Oct 04, 2017 2:11 am

Re: L3 HW

Post by TheoD914 » Mon Oct 09, 2017 7:15 pm

Capito, so ya just seems like its a universal problem sofar im at 0.0011% lets see how that goes..
Top
Raietzu
Posts: 4
Joined: Mon Oct 02, 2017 6:16 pm

Re: L3 HW

Post by Raietzu » Mon Oct 09, 2017 8:06 pm

Should be about right, mine's at 0.0008%
Top
mck
Posts: 33
Joined: Sat Dec 10, 2016 2:52 am

Re: L3 HW

Post by mck » Tue Oct 10, 2017 3:46 am

TheoD914 wrote:im at 384M left it at what it was
Same for me, never overclocked. Only underclocked once trying to mine low difficulty coins with a relatively low total network hashrate...
Top
TraderSP
Posts: 4
Joined: Tue Oct 03, 2017 10:41 am

Re: L3 HW

Post by TraderSP » Tue Oct 10, 2017 7:54 pm

Jakeg5280 wrote:
TraderSP wrote:
mck wrote:These are HW errors, but it is quite normal for an ASIC to have a few of them.
One of my boards gets about 1000 HW errors every hour now, that is a bit much I presume!
Mee too. 8000 in 17h.
What frequency are you running it on?
384.
Top
diplomatico
Posts: 1
Joined: Sat Oct 28, 2017 3:10 am

Re: L3 HW

Post by diplomatico » Thu Nov 02, 2017 3:51 am

The same : 38 (#1) 8 (#2) 1 (#3) 0(#4). The machine restarted 2 times.....
Where can I find the % of HW ?
Top
ZiGen
Posts: 64
Joined: Wed Oct 04, 2017 7:29 pm

Re: L3 HW

Post by ZiGen » Thu Nov 02, 2017 10:41 pm

diplomatico wrote:The same : 38 (#1) 8 (#2) 1 (#3) 0(#4). The machine restarted 2 times.....
Where can I find the % of HW ?
5-6 posts above yours ... :lol:
Top
Locked

Return to “System support”