So today I checked my Antminer L3+ and I noticed under the HW column under Antminer under Miner Status it showed a 12 instead of a 0 as it was the last few days.
Anyone know what does that mean? Thanks!
L3 HW
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.
Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.
We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.
Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.
We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.
For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Re: L3 HW
These are HW errors, but it is quite normal for an ASIC to have a few of them.
One of my boards gets about 1000 HW errors every hour now, that is a bit much I presume!
One of my boards gets about 1000 HW errors every hour now, that is a bit much I presume!
Re: L3 HW
Mee too. 8000 in 17h.mck wrote:These are HW errors, but it is quite normal for an ASIC to have a few of them.
One of my boards gets about 1000 HW errors every hour now, that is a bit much I presume!
Re: L3 HW
What frequency are you running it on?TraderSP wrote:Mee too. 8000 in 17h.mck wrote:These are HW errors, but it is quite normal for an ASIC to have a few of them.
One of my boards gets about 1000 HW errors every hour now, that is a bit much I presume!
Re: L3 HW
Theo,
Hardware errors are completely normal for ASIC miners. L3+ is build with 4 boards x 72 each = 288 ASIC chips. It is expected that some chips will miscalculate from time to time. The software - cgminer - is checking real quick each chip hash/share checksum to verify that it's valid. If NOT matching - than chip miscalculated this one and bingo ! Hardware Error ! This is how these ASIC miners are build by design.
What is important in HW statistics is NOT absolute number, but PERCENTAGE shown to the right of it. Everything less than 0.5% is ACCEPTABLE ! Mine miners are running within ~0.2% range.
Hope this will help putting your worries to rest.
Regards,
ZiGen
Hardware errors are completely normal for ASIC miners. L3+ is build with 4 boards x 72 each = 288 ASIC chips. It is expected that some chips will miscalculate from time to time. The software - cgminer - is checking real quick each chip hash/share checksum to verify that it's valid. If NOT matching - than chip miscalculated this one and bingo ! Hardware Error ! This is how these ASIC miners are build by design.
What is important in HW statistics is NOT absolute number, but PERCENTAGE shown to the right of it. Everything less than 0.5% is ACCEPTABLE ! Mine miners are running within ~0.2% range.
Hope this will help putting your worries to rest.
Regards,
ZiGen
Re: L3 HW
Yeah on the last row under Pools HW shows just 17 (it has gone up a few numbers today)
and chain #3 shows 17 under the HW section
just wondering if i did anything wrong but hopefully it will be alright!
and chain #3 shows 17 under the HW section
just wondering if i did anything wrong but hopefully it will be alright!
Re: L3 HW
It will dont worry this is normal. like the guy in the previous post stated.TheoD914 wrote:Yeah on the last row under Pools HW shows just 17 (it has gone up a few numbers today)
and chain #3 shows 17 under the HW section
just wondering if i did anything wrong but hopefully it will be alright!
Re: L3 HW
Perfect! Waiting on the next one to come in the mail