L3 Miner Very Inefficient

Encounter a problem related to the pool or have a request for a feature? Post your issue here and we will help you out.
Forum rules
Welcome to the System Support forum! Encounter a problem related to the pool? Post your issue here and we will help you out.

Keep in mind that the forums are monitored by PROHASHING less closely than the official support channels, so if you have a pressing issue, please submit an official support ticket so that our Support Analyst can look into your issue in a timely manner.

We cannot answer financial questions related to your account on a public forum, so those questions should always be submitted through the orange Support button on prohashing.com/about.

For the full list of PROHASHING forums rules, please visit https://prohashing.com/help/prohashing- ... rms-forums.
Kfedorek
Posts: 29
Joined: Sun Sep 10, 2017 6:33 pm

Re: L3 Miner Very Inefficient

Post by Kfedorek » Fri Sep 29, 2017 2:48 pm

Ya same here...missing like 1.5-2 LTC at current daily averages and the time of the day.
zikkah
Posts: 4
Joined: Fri Sep 29, 2017 2:56 pm

Re: L3 Miner Very Inefficient

Post by zikkah » Fri Sep 29, 2017 3:00 pm

Jalapan wrote:
dog1965 wrote:huh what do you mean ?
he means stale shares/shares not counting properly or something similar.. and the brothers that run this pool always take care of 99% of the errors.
most likely we will be refunded etc
Thanks for that reply. Just got started today and was a bit surprised about the earnings too, to say the least ;)
dog1965
Posts: 109
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Fri Sep 29, 2017 3:30 pm

I dont know why but it works for me try to stay low on the diff seems to work much better dont go lower than 2048 though.
zikkah
Posts: 4
Joined: Fri Sep 29, 2017 2:56 pm

Re: L3 Miner Very Inefficient

Post by zikkah » Fri Sep 29, 2017 4:05 pm

Do you look up the different numbers of diffs somewhere, or is it pure trial and error?
dog1965
Posts: 109
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Fri Sep 29, 2017 5:40 pm

pure trial and error.
perandre
Posts: 2
Joined: Fri Sep 29, 2017 12:56 pm

Re: L3 Miner Very Inefficient

Post by perandre » Sat Sep 30, 2017 4:15 am

Support got back to me:

Hi,

I apologize for the issue. From September 28 at 7PM (ET) to September 29 at 5PM (ET), the mining server experienced a bug and was crediting people less than they deserved for high difficulty shares. We have fixed the bug, and I just increased user balances for those two days proportionately to how they were affected. As always, please feel free to contact us if you have any other problems.

Sincerely,

-Chris Sokolowski
Manager, Prohashing.com
dog1965
Posts: 109
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Sat Sep 30, 2017 5:28 am

thanks chris. keep up the good work.
molitar
Posts: 2
Joined: Tue Oct 03, 2017 1:45 am

Re: L3 Miner Very Inefficient

Post by molitar » Tue Oct 03, 2017 3:07 am

Ok I have a question. Current miners are running at d=131072

Miners

molitar.1 ~463.52 MH/s
molitar.2 ~480.78 MH/s
molitar.3 ~581.33 MH/s
molitar.4 ~508.40 MH/s

3 and 4 are consistantly higher than either 1 and 2. Does this mean my d value would be incorrect for 1 and 2 and if so any suggestions which direction?

Efficiency 93.33% but only running about an hour so far so waiting to see if that goes up anymore.
dog1965
Posts: 109
Joined: Sun Sep 03, 2017 8:27 am

Re: L3 Miner Very Inefficient

Post by dog1965 » Tue Oct 03, 2017 7:07 am

TRY bringing 1 and 2 lower see what that does what type of miners are they l3+'s if so not all units run at the same speed no matter which pool you on but like I said bring down d= on 1 and 2 see what that does.
molitar
Posts: 2
Joined: Tue Oct 03, 2017 1:45 am

Re: L3 Miner Very Inefficient

Post by molitar » Tue Oct 03, 2017 9:54 am

dog1965 wrote:TRY bringing 1 and 2 lower see what that does what type of miners are they l3+'s if so not all units run at the same speed no matter which pool you on but like I said bring down d= on 1 and 2 see what that does.
Ok is there best practice for how much to bring it down? like 1/8th, 1/4th, etcetera?

Second approximately how much should I make with 4 of these miners daily currently?
Locked